SERIES 8 / SERIES 8.1

Přímý modulární pás I Rozteč modulů 25.4 mm (1 in)

Pro středně těžké až těžké aplikace

Design characteristics Series 8

  • Closed hinge design provides high belt pull capacity

  • Rigid module design makes belt suitable for long conveyors

  • Robust design guarantees superior durability

  • Closed solid edge design

  • Flame retardant version available
    (PXX-HC – in line with DiN EN 13501-1)

Design characteristics Series 8.1

Designed for further improvements on noise reduction.

  • The underside of the belt has an improved contact surface area with the slide bars

  • An optimized module and hinge shape allows quiet transition between the slide bars and when entering and leaving the slider bed

Series 8 and Series 8.1 are driven by the same sprockets.
Series 8 and Series 8.1 can be combined and they can use the same range of accessories.

S8_8-1_EN.jpg

Basic data

 

Pitch

 

Belt width min.

Width increments

 

Hinge pins

Belt width min. at S8.1-30 FLT

Width increments at S8.1-30 FLT

Belt width min. at S8.1-30 FLT GT

Width increments at S8.1-30 FLT GT

 

25.4 mm (1 in)

 

38.1 mm (1.5 in)

12.7 mm (0.5 in)

12.7 mm (0.5 in)

76.2 mm (3 in)

12.7 mm (0.5 in)

191 mm (7.52 in)

-

Series 8_8.1.jpg

S8-0 FLT | 0% Opening | Flat top

 

  • Closed, smooth surface

  • Flat top surface

S8-0 FLT.jpg

S8-0 SRS | 0% Opening | Slip-resistant surface

 

  • Closed surface

  • Slip-resistant surface, pleasant to walk and kneel on

S8-0 SRS.jpg

S8-0 NSK | 0% Opening | Non skid

 

  • Closed surface

  • Non-skid surface for increased safety when walking on belt

  • Flat top sections across the belt width for supporting the belt on the return

S8-0 NSK.jpg

S8-0 NSK2 | 0% Opening | Non skid (Design 2)

 

  • Closed surface

  • Non-skid surface for increased safety when walking on belt

  • Closed hinges

  • Uninterrupted NSK-structure across the full belt width

S8-0 NSK2.jpg

S8-25 RAT | 25% Opening | Radius top

 

  • Open area (25 %) with rounded contact surfaces

  • radius top belt surface ensures minimum product contact and good release characteristics

S8-25 RAT.jpg

S8.1-30 FLT | Open version (30%) | Smooth surface

 

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface

S8.1-30 FLT.jpg

S8.1-30 FLT GT | Open version (30%) | Smooth surface

 

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface | with guiding tabs, optimized chain guidance in long lines where hygiene is critical

S8.1-30 FLT GT.jpg

S8-0 FRT1 | 0% Opening | Friction top surface (Design 1)

 

  • Closed surface

  • Friction top with cube-shaped High Grip pads

  • Grooves inbetween to improve flexibility and to channel dirt away from the friction surface

  • Closed hinges

S8-0 FRT1.jpg

S8-0 RTP A90 | 0% Opening | Roller top A90

 

  • Closed surface with roller top at 90° to the direction of travel

  • version for low-friction merging of products lateral

S8-0 RTP A90.jpg

Sprockets

 

In different sizes with round or square sprocket bore

s8_sprocket.jpg

Profiles

 

in different heights and designs for inclines

s8_profile.jpg

Side guards

 

in different heights for retention of bulk products

s8_sideguard.jpg

Hold Down Taps

 

Hold Down Tabs for additional guiding

s8_hold_down.jpg

Pin Retained Rollers

 

For applications where low back pressure accumulation or product separation is required

S8_PRR.jpg